Tel: 3456 43 4473456

Weaving in the arts: widening the learning circle - Weaving In The Arts - bankowned.solutions


The way the warp and filling threads interlace with each other is called the weave. The majority of woven products are created with one of three basic weaves: plain weave , satin weave , or twill . Woven cloth can be plain (in one colour or a simple pattern), or can be woven in decorative or artistic design.

In general, weaving involves using a loom to interlace two sets of threads at right angles to each other: the warp which runs longitudinally and the weft (older woof ) that crosses it. One warp thread is called an end and one weft thread is called a pick . The warp threads are held taut and in parallel to each other, typically in a loom. There are many types of looms. [3]

The warp is divided into two overlapping groups, or lines (most often adjacent threads belonging to the opposite group) that run in two planes, one above another, so the shuttle can be passed between them in a straight motion. Then, the upper group is lowered by the loom mechanism, and the lower group is raised (shedding), allowing to pass the shuttle in the opposite direction, also in a straight motion. Repeating these actions form a fabric mesh but without beating-up, the final distance between the adjacent wefts would be irregular and far too large.

David has a bachelor's degree in architecture, has done research in architecture, arts and design and has worked in the field for several years.

Many have seen a Persian or a Turkish carpet. They are beautiful and often look exotic. For centuries, this decorative product has captivated the attention of the Western World. Oriental carpets have often been surrounded by mysticism and have inspired stories and legends like flying carpets.

Islamic carpets are also known as oriental rugs . They are a heavy textile that is usually handwoven or hand-knotted, and they are artistic and utilitarian objects. Carpet weaving is an important activity in many Islamic countries in Northern Africa, Central Asia and the Middle East. They are sometimes also referred to by the most popular places of origin: Persian carpets from Iran and Turkish or Ottoman carpets from Turkey.

The way the warp and filling threads interlace with each other is called the weave. The majority of woven products are created with one of three basic weaves: plain weave , satin weave , or twill . Woven cloth can be plain (in one colour or a simple pattern), or can be woven in decorative or artistic design.

In general, weaving involves using a loom to interlace two sets of threads at right angles to each other: the warp which runs longitudinally and the weft (older woof ) that crosses it. One warp thread is called an end and one weft thread is called a pick . The warp threads are held taut and in parallel to each other, typically in a loom. There are many types of looms. [3]

The warp is divided into two overlapping groups, or lines (most often adjacent threads belonging to the opposite group) that run in two planes, one above another, so the shuttle can be passed between them in a straight motion. Then, the upper group is lowered by the loom mechanism, and the lower group is raised (shedding), allowing to pass the shuttle in the opposite direction, also in a straight motion. Repeating these actions form a fabric mesh but without beating-up, the final distance between the adjacent wefts would be irregular and far too large.




41JPR2HKG7L